For Better Performance Please Use Chrome or Firefox Web Browser

Publications

Journal Papers
sort ascending
Morphology and rheological properties of compatibilized low‐density polyethylene/linear low‐density polyethylene/thermoplastic starch blends Summer 2017
Fabrication of semi-conductive natural rubber nanocomposites with low copper nanoparticle contents Summer 2017
Topochemistry of cellulose nanofibers resulting from molecular and polymer grafting Spring 2017
Effect of drying method on the structure and porous texture of silica-polybutadiene hybrid gels: Supercritical vs. ambient pressure drying Summer 2017
Crystallinity study of electrospun poly (vinyl alcohol) nanofibers: effect of electrospinning, filler incorporation, and heat treatment Summer 2016
Elucidating the Significance of Segmental Mixing in Determining the Gas Transport Properties of Polyurethanes Fall 2016
Fabrication and characterization of electrospun bionanocomposites of poly (vinyl alcohol)/nanohydroxyapatite/cellulose nanofibers Summer 2016
Effect of nanoclay on the properties of low density polyethylene/linear low density polyethylene/thermoplastic starch blend films Fall 2016
Nonisothermal suspension polymerization of vinyl chloride for enhanced productivity Spring 2016
Effect of multi-walled carbon nanotube on mechanical and rheological properties of silane modified EPDM rubber Fall 2016
Surface functionalization of rubber latex nanoparticles with sulfidosilane moieties Spring 2016
Numerical study on increasing PVC suspension polymerization productivity by using PSO optimization algorithm Spring 2016
Plasticization resistant crosslinked polyurethane gas separation membranes Summer 2016
Synthesis of silica-polybutadiene hybrid aerogels: The effects of reaction conditions on physical and mechanical properties Winter 2016
Polyurethane gas separation membranes with ethereal bonds in the hard segments Summer 2016
Preparation and characterization of hybrid aerogels from novolac and hydroxyl-terminated polybutadiene Winter 2016
Optimization of acid hydrolysis conditions to improve cellulose nanofibers extraction from wheat straw Winter 2015
"Study of the effect of natural weathering on degradation of Polypropylene/starch filled polymer containing photo initiators by spectroscopic methods Summer 2015
Study on ternary low density polyethylene/linear low density polyethylene/thermoplastic starch blend films Fall 2015
Mechanical properties of a polyurethane/montmorillontte nanocomposite featuring organomodification synthesized via in situ polymerization Summer 2015
Investigation of the effects of nonisothermal suspension polymerization of vinyl chloride on resin properties Fall 2015
Preparation and characterization of low‐density polyethylene/thermoplastic starch composites reinforced by cellulose nanofibers Summer 2015
Investigation of the effects of nonisothermal suspension polymerization of vinyl chloride on the fusion and degradation behavior of poly (vinyl chloride) Fall 2015
Mechanistic investigation of nonisothermal suspension polymerization of vinyl chloride Summer 2015
Comparison of cure characteristics and mechanical properties of nano and micro silica‐filled CSM elastomers Winter 2015
S-PVC grain morphology: a review Summer 2015
Combination effects of carbon nanotubes, MMT and phosphorus flame retardant on fire and thermal resistance of fiber-reinforced epoxy composites Summer 2014
Extraction and characterization of rice straw cellulose nanofibers by an optimized chemomechanical method Summer 2014
Optical and mechanical properties of transparent acrylic based polyurethane nano Silica composite coatings Summer 2014
Preparation and characterization of cellulose nanofiber reinforced thermoplastic starch composites Summer 2014
Effect of OMMTs on flame retardancy and thermal stability of poly (ethylene‐co‐vinyl acetate)/LDPE/magnesium hydroxide composites Summer 2014
Influence of MA‐g‐HDPE compatibilizer content on quality and adhesion/bending strength of polyethylene/O‐MMT coating films Summer 2014
Preparation and study on the properties of LDPE-thermoplastic starch blends; Part I: Effect of PE-g-MA on the mechanical properties and flpw behavior Winter 2014
Flammability and thermal properties of epoxy/glass/MWNT composites Summer 2014
Effect of organomodified montmorillonite concentration on tensile and flow properties of low-density polyethylene–thermoplastic corn starch blends Fall 2014
The effect of organo-modified montmorillonite on mechanical and barrier properties of linear low-density polyethylene/low-density polyethylene blend films Spring 2013
Effect of various parameters on the chemical grafting of amide monomers to poly (lactic acid) Winter 2013
Sabetzadeh, M., R. Bagheri, and M. Masoomi, and M. Ranjbar, "Preperation and study on the properties of LDPE-thermoplastic starch blends;; Part II: Water absorption behavior". Nashrieh Shimi va Mohandesi Shimi Iran, 2013. 32(69), p: 25-30. Fall 2013
Compatibilization of Multi-Wall Carbon Nanotube/EPDM: Studies on the Properties of Nanocomposite Summer 2013
Preparation of porous nanofibers from electrospun polyacrylonitrile/calcium carbonate composite nanofibers using porogen leaching technique Summer 2013
Tribological and mechanical properties of amorphous and semi-crystalline PEEK/SiO 2 nanocomposite coatings deposited on the plain carbon steel by electrostatic powder spray technique Summer 2012
Investigation of the addition of nano‐CaCo3 at dry mixing or onset of fusion on the dispersion, torque, and mechanical properties of compounded PVC Winter 2012
Effect of corn starch content in thermoplastic starch/low‐density polyethylene blends on their mechanical and flow properties Summer 2012
Prediction of Mechanical Properties of LDPE-TPS Nanocomposites Using Adaptive Neuro-Fuzzy Inference System Spring 2012
Pressure drop of non-Newtonian nanofluids flowing through a horizontal circular tube Spring 2012
41. M. Hojjat, S. Gh. Etemad, R. Bagheri, J. Thibault, Laminar convective heat transfer of non-Newtonian nanofluids with contant wall temperature, Heat Mass Transfer June 2011
46. S. Bagherpour, R. Bagheri, A. Saatchi, Estimation of long-term stiffness of storage aged GFRP composite samples immersed in HCL acid by TTSP method, ISRN mechanical engineering February 2011
35. M. Hojjat, S. Gh. Etemad, R. Bagheri, Laminar heat transfer of non-Newtpnian nanofluids in a circular tube, Korean J. Chem. Eng December 2011
40. M. Hdayati, M. Salehi, R. Bagheri, M. Panjepour, A. Maghzian, Ball milling preparation and characterization of poly (ether ether ketone ) / surface modsified silica nanocomposite, Powder Technology August 2011
45. M. Nasiri, S. Gh. Etemad, R. Bagheri, Experimental heat transfer of nanofluid through an annular duct April 2011
. Hojjat, S. Gh. Etemad, R. Bagheri, J. Thibault, Convective heat transfer of non-Newtonian nanofluids through a uniformly heated circular tube, Int. J. Ther. Sci. 50, 525-531 August 2011
44. M. Nasiri, S. Gh.Etemad, R.Bagheri, Turbulent Convective heat transfer of nanofluids through a square channel, Korean J. Chem.Eng June 2011
38. M. Hojatt, S. Gh. Etemad, R. Bagheri, J. Thibault, Rheological characteristics of non-Newtonian nonofluids: Experimental investigation, Int. Commu. in Heat and Mass Trans. 38, 144-148 September 2011
43. M. H. Abassi, S. Nouri-khorassani, R. Bagheri, J. Moftakharian, Microcellular foaming of LDPE using nano-Co3ca as a nucleating agent, Polymer Composite September 2011
37. R. Bagheri, Investigation of various factors effects on mechanical properties of poly ( propylene ) / organo-modified montmorillonite / magnesium hydroxide composites, Int. J. Plast. Technol August 2011
42. M. Hojat, S. Gh. Etemad, R. Bagheri, J. Thibault, Turbulent forced convection heat transfer of non Newtonian nanofluid, Experimental thermal and fluid science August 2011
47. M. Hedayati, M. Salehi, R. Bagheri, M. Panjepour, F. Naeimi, Tribological and mechanical properties of amorphous and semi-crystalline PEEK/SiO2 nanocomposite coatings deposited on the plain carbon steel by electrostatic powder spray technique, Progres April 2011
36. M. Hojjat, S. Gh. Etemad, R. Bagheri, J. Thibault, Thermal conductivity of non-Newtonian nanofluids: Experimental data and modeling using neutral network, Int. J. Heat and Mass Trans October 2011
33. N. Etesami, M. Nasr Esfahany, R. Bagheri, Investigation of the effect of delayed reflux on PVC grain properties produced by suspension polymerization, J. Appl. Polym. Sci. 117, 2506-2514 September 2010
32. N.Etesami, M.Nar esfahani, R.Bagheri, Experimental study of the effect of reflux rate during suspension polymerization on particle properties of PVC resin, Ind. Eng. July 2010
29. Bagherpour, M. Bagheri, R., Saatchi, A., Effect of concentrated HCL on the mechanical properties of storage aged fibre glass polyester composite, Material and Design, March 2009
31. R. Bagheri, Study of the effect of gamma-absorbed dose on degradation of polypropylene/starch-filled polymer containing photo-initiators by spectroscopic methods, Radition physics and chemistry September 2009
30. N. Etesami, M. Nasr Esfahani, R. Bagheri, Effect of the phase ratio on the particle properties of poly(vinyl chloride) resins produced by suspension polymerization, J. Appl. Polym September 2008
34. R. Bagheri, C. M. Liauw, N. S. Allen, Factors effecting the performance of Montmorillonite / Mangnesium hydroxide / Poly ( propylene ) Ternary composites, 1 Flame retardation and thermal stability, Macromol. Mater. Eng November 2008
1. Bagheri, R. , and Naimian, F . “Melt flow properties of Starch-filled Linear Low density polyethylene: Effect of photoinitiators” J. Appl. Polym. Sci, 104, 178 November 2007
6. Bagheri, R. Golozar, M.A, “Mechanical Properties of Polypropylene Coating Containing Maleic Anhydride on Plain Carbon Steel” Esteglal, J.Eng.I.U.T, 25, (1) February 2007
4. Khabbazi, H., Bagheri, R., Golozar, M.A, “Gragting of Maleic Anhydride onto Co(propylene-b-ethylene) by Extrusion Process: Measurement of Adhesion to Steel Surface” Esteglal, J.Eng.I.U.T, 26, September 2007
3. Afgani, T. ,Bagheri, R. , Nehzat, M.S. “Emulsion Copolymerization of Methacrylate and Buty Acrylate: The Study of Effective Parameters on Resin Formation and its Physical Properties”, J.Polym.Sci.and Technology(Persian) February 2006
Morshedian, J. Mirzataheri, M. Bagheri, R. and Moghadam, M. “Solventless Surface Modification of LDPE through Electron Beam Radiation Grafting of 2-Hydroxyethyl Methacrylate” Iranian Polymer Journal Vol 14, August 2005
2. Etemad , S.Gh. , Bagheri, R. , Zeinali Heris ,S. “Theoritical and Experimental Study of Falling-Cylinder Rheometer” Iran.J.Chem.Eng 1 (2) 19 October 2004
9. Etemad, S.Gh., Etesami, N., Bagheri, R. and Thibault, J. “Drying of Latex Films of Poly (Vinyl Acetate)”, Drying Technology, v.20, 1843 February 2002
7. Bagheri, R., and Naimian, F. “Effect of Photo-Initiators on Melt Degradation of Polypropylene and Starch – Filled Polymer”, Polymer International, v.51, 907 November 2002
11. Bagheri, R., Golozar, M. A. and Etessami, M. “Fluidized Bed Polyethylene Powder Coatings on Carbon Steel: A Study of Effective Parameters on Adhesion”, International Journal of Engineering Science (Iranian), v.13. no.2, 1 February 2002
10. Sadeghi, F., Etemad, S.Gh. and Bagheri, R. “Effect of Geometrical Parameters of a Sprial Mandrel Die” unpublished work December 2002
19. Etessami, M. Golozar, M-A. and Bagheri, R., “High Mechano-Chemical Resistant Polyethylene Coatings on Carbon Steel by Fluidized Bed Technique”, Journal of Engineering Metallurgy, (Iranian), no. 7, 3rd Year November 2000
13. Bagheri, R. Golozar, M.A. “Quality of Polyethylene Coatings on the Steel and the Role of Primers” Esteghlal, I.U.T. Engineering Journal (Iranian), no. 1 September 2000
8. Bagheri, R. “Effect of Processing on the Melt Degradation of Starch - Filled Polypropylene”, Polymer International, v.48, 1257 November 1999
14. Baghari, R. and Jafarpour, A.R. “Polyurethane Elastomers: Synthesis and the Effects of Dihydroquinone on Properties”, Polymer International, v. 45, 369 October 1998
12. Bagheri, R. and Mohsenipour, A. A. “Synthesis of MethyMethacrylate-n- Butylacrylate Copolymers: Study of the Paint Properties”, Journal of Applied Polymer Science, v. 70, 367 July 1998
16. Mehdiabadi, S., Nehzat, M.S. and Bagheri, R. “Correlating Viscosity in Urea-Formaldehyde Polymerization”, Journal of Applied Polymer Science, v.69, 631 September 1998
15. Golozar, M.A. and Bagheri, R. “High Desity Polyethylene Coating on Carbon Steel by Electrostatic Powder Spray System” Journal of Applied Polymer Science, v. 70, 2507 May 1998
18. Bagheri, R. Naimian, F. and Sheikh, N., “Grafting of Acrylamid to Law Density Polyethylene During Melt Processing”, Iranian Journal of Chemistry and Chemical Engineering, v.16, no.2, 91 June 1997
17. Bagheri, R., Naimian, F. and Sheikh, N., “Radiation Grafting of Acrylamide onto Starch - Filled Low density Polyethylene”, Radiation Physics and Chemistry February 1997
20. Bagheri, R. in “Comprehensive Polymer Science”, v.6, Chap. 19, Pergamon Press, P547 (1989), edited, by Bevington, J.C. March 1989
21. Bagheri, R., Chakraborty, K.B., Scott, G. “Mechaisms of Antioxidant Action: Cupric Stearate as a Catalytic Antioxidant,” Polymer Degradation and Stability, v.11, no.1 August 1985
23. Bagheri, R., Chakraborty, K.B., Scott, G., “Mechanisms of Antioxidant Action: The Role of Iodine in the Stabilisation of Polypropylene”, polymer Degradation and stabilization February 1984
22. Bagheri, R., Chakraborty, K.B., Scott, G., “Mechanisms of Antioxidant Action: Transformations of 4-Hydroxy-2,2, 6,6- Tetramethyl piperidinoxyl (HTMPO) in Polypropylene During Processing”, Journal of Polymer Science, Poly. Chem. ed. v.22, 1573 April 1984
25. Bagheri, R., Chakraborty, K.B. and Scott, G., “Mechanisms of Antioxidant Action: Thermal Oxidative Stability of Processed Polypropylene,” Polymer Degradation and Stability April 1983
24. Bagheri, R., Chakraborty, K.B., Scott, G., “Mechanisms of Antioxidant Action: Evidence for a Regenerative Cycle During Melt Stabilization of Polypropylene”, Polymer Degradation and Stabilisation September 1983
26. Bagheri, R. in “Degradation and Stabilisation of Polyolefins”, Chap. 6, (1983), edited by Allen, N.S. December 1983
27. Bagheri, R., Chakraborty, K.B., Scott, G., “Mechanisms of Antioxidant Action: Behaviour of a Hindered Piperidine and Related Oxidation Products During Processing and photo – Oxidation of Polypropylene”, Polymer Degradation and Stability July 1982
28. Bagheri, R., Chakraborty, K.B. and Scott, G., “Mechanisms of Antioxidant Action: The Role of Galvinoxyl as a Melt Stabiliser for Polypropylene,” Chemistry and Industry January 1980
Conference Papers
sort ascending
Hedayati, M. Salehi, M. Bagheri, R. “High energy ball milling technique to prepar poly ( ether ether ketone ) / SiO2 polymer matrix nanocomposite powder “ August 2010
Seifi, A. Bagheri, R. Golozar, M.A. Khodami, A. “ Modified Nanosilica / HDPE-g-MA coating on steel by cast-solution method: Superhydrophobicity and corrosion resistance “ December 2010
Hedayati, M. Bagheri, R. Salehi, M. Panjepour, M. “ Chemical surface modification of precipitated silica nanoparticles using 3-glycidoxypropyltrimethoxysilane by deposition from aqueous alcohol “ April 2010
Hedayati, M. Salehi, M. Bagheri, R. Panjepour, M. “Effect of crystalline structure of poly (ether ether ketone ) coatings on tribological behavior and adhesion strength of the polymer using powder spray electrostatic technique “ October 2010
Hashmzadeh, Y. Salehi, M. Panjepour, M. Bagheri, R. “Rheological and optical properties of Acrylic-based polyurethane / precipitated nanosilica composite coatings “ International Congress on Nanoscience and Nanotechnology “ November 2010
Ahmadkhanbeigi L. Masoomi, M. Bagheri, R. “Effect of O-MMTs on flame retardancy and thermal stability of poly ( E-co-VAc ) / LDPE / Magnesium hydroxide Coposites” October 2009
Hojjat, M. Etemad, S.Gh. Bagheri, R. Thibault, J. Rheological behavior of non-newtonian nanofluids, The 6th international chem.. eng. Cog. & exhibition, November 2009
Etesami, N. Nasr Esfahani, M. Bagheri, R. “Application of DOE method to experimental study of the process parameter effect on porosity of S-PVC grains” October 2009
Laghaei, M. Mohsenipour, A.A. Bagheri, R. Investigation of the synthesized acrylic terpolymers ( MMA, n-BA, AA ) paint properties, The 6th international chem.eng.cong.& exhibition November 2009
Bagheri, R. Aliabadi farahani, M. “ Comparison of the effect of different types of O-MMT on poly( propylene ) properties “ October 2009
Laghaei, M. Bagheri, R. Properties of the “ in situ’’ synthesized O-MMT acrylic terpolymers for paint application, The 6th international chem.eng.cong.& exhibition November 2009
Bagheri, R. Beigi, A. “ O-MMT / NR nanocomposite: Effect of filler on mechanical properties “ November 2008
Bagheri, R. Liauw, C.M. “A study of flame and Thermal resistances of Polypropylene Nano-Composites” February 2007
Etesami, N. Nasr Esfahany, M. Bagheri, R. “Experimental Investigation of the Effect of Phase Ratio on Particle Size Distribution of S-PVC Resin” February 2007
Etesami, N. Bagheri, R. Nasr Esfahany, M. “Experimental Investigation of the Effect of Phase Ratio on Cold Plasticizer Absorption and Bulk Density of S-PVC” August 2007
. Bagheri, R. Liauw, C.M. “Poly(propylene) nano silicate composites: analysis of the various factors effects on melt mixing and flow rate” 17th International Congress of Chemical and Process Engineering August 2006
. Etesami, N. Bagheri, R. Nasr Esfahany, M. “Application assessment of DOE method in analysis of PVC.(S) particles morphology” August 2006
Khabazi, H. Bagheri, R. Golozar, M.A “ Adhision and Corrosion resistance of Modified Co(propylene-b-ethylene) powder coating on carbon steel surface by electrostatic spray technique” November 2005
Khabazi, H. Bagheri, R. Golozar, M.A “ Ductility and Adhision of Modified Co(propylene-b-ethylene) powder coating on steel substrate using Electrostatic spraying” May 2005
Madhkhan, M. Bagheri, R. “Influence of Fire Retardant Fillers’ Characteristic on Flammability and Mechanical Behavior of Epoxy Composites” February 2005
Afgani, T. Bagheri, R. Nehzat, M.S. “Emulsion terpolymerisation based on MMA/BA: Effect of 3rd monomers (AA, MAA, BMA, HEMA) on physical properties of the resins” 10th National Chem.Eng.Congress November 2005
Afgani, T. Bagheri, R. Nehzat, M.S. “Effect of effective parameters in Emulsion Co polymerization of MMA-BA on physical properties of the resin” 9th National-Chem.Eng.Congress November 2004
Afgani, T. Bagheri, R. Nehzat, M.S. “Synthesis of Acrylic resin / Nano silica composites and investigation of their physical properties” 9th National-Chem.Eng.Congress November 2004
Bagheri, R. and Madhkhan, M. “The Effect of Phosphorus flame Retardant in Epoxy-Fibre glass Composites May 2003
Bagheri, R. and Mehdizadeh, S. “Maleic Anhydride Modified Polypropylene Coating on carbon steel by spray electrostatic powder coating May 2003
Bagheri, R. and Golozar, M-A., “Adhesion of Polyethylene to Carbon Steel: Study of Effective Parameters”, September 2002
AsadiNejad. A., Bagheri, R. and Etemad, S.Gh. “Study of Rheological Behaviour of poly (ethylene glycol) Solutions in Aqueous Media”, October 2002
Etemad, S. Gh., Bagheri, R. and Haris Z., S. “Design and Construction of Capillary Rheometer for Measuring the Rheological Properties of Non-Newtonian Fluids”, May 2001
Shahinpour, S. and Bagheri, R. “Thermal Oxidation of Silica – Filled NBR: Synergistic effect of Antioxidats” May 2001
Bagheri, R. and Naimian, F. “Effect of Photo-initiators on Melt Degradation of Polypropylene and Starch – Filled Polymer” September 2001
Etesami, N., Etemad, S.Gh. and Bagheri, R. “The Effect of Various Parameters on Drying of the Film of Poly (vinyl acetate)” May 2001
Etemad, S.Gh., Bagheri, R., and Haris Z., S. “Experimental Study of the Rheologycal Behaviour of Non-Newtonian Fluids Using Falling Cylinder Rheomerter” September 2001
Bagheri, R. and Shamaghdari, R. “Comparison of the Effects of Crosslinking Agents on Epoxy-Novalac resin Curing Process” April 2000
Bagheri, R. and Jafarpour, A-R. “Effect of Inorganic Fillers on Thermal and Mechanical Properties of Synthetised Polyurethane Elastomers” September 2000
Etemad, S. Gh., Bagheri, R. and Zeinali Haris, S. “Deriving Applied Equations for Falling Cylinder Rheomerter” March 1999
Etessami, M., Bagheri, R. and Golozar, M. “High Mechano-Chemical Resistant of Polyethylene Powder Coating on Carbon Steel by the Fluidized Bed Technique”, September 1999
Arabi, H. and Bagheri, R. “Effective Parameters in Making and Performance of the Rubber Fenders, Used in Iranian South Ports” November 1998
Etesami, M., Bagheri, R. and Golozar, M-A. “Investigation of Effective Parameters on Adhesion of Polyethylene Coatings to the Steel Surface by the Fluidised Bed Technique” March 1998
Shamaghdari, R. and Bagheri, R. “Polymerisation of Epichlorohydrin with Novalac Resin” March 1998
. Bagher, R. and Karimiyeganeh, P. “Emulsion Polymerisation of Vinyl Acetate: Effect of Sodium Dodecyl hydrogen Sulphate and theory of latex particle formation” September 1997
Kholghy, M., Golozar, M.A., Bagheri, R. “Protection of Plain Carbon Steel in Wet Environments, Using High Density Polyethylene” September 1997
Mohsenipour, A-A. and Bagheri, R. “Acrylic Copolymer Resin: Synthesis and Study of the Properties as Paint”, September 1997
Rezvanfar, A., Mohammadi, N. Chavoshi, A.R. and Bagheri, R. “Effect of Particle Size, Coating, Temperature and Antioxidant on High Filled Polyurethane Degradation” November 1997
. Golozar, M-A. and Bagheri, R. “Spray Electrostatic Powder Coating of High-density Polyethylene on Plain Carbon Steel”, August 1997
Bagheri, R. and Golozar, M.A. “High Performance Polyethylene Coating on Carbon Steel by an Electrostatic Powder Spray System”, March 1997
Bagheri, R. and Mohssenipour, A.A. “Synthesis and Properties of an Acrylic Resin for Paint Application” November 1997
Bagheri, R. and Jafarpour, A.R. “Polyurethane Elastomers: Synthesis and the Role of Dihydroquinone on properties” November 1997
Bagheri, R. and Moayed, A. “Effect of a Curing System Concentration Change on Mechano-Chemical Resistance of Acrylonitrile Butadiene Rubber September 1996
Bagheri, R. and Jafarpour, A-R. “Effects of Structural Parameters and Inorganic Fillers on Thermo-Mechanical Properties of Synthetised Polyurethane Elastomers” November 1996
Kholghy, M. Golozar, M.A., Bagheri, R. “Conditions of Carbon Steel Surface and Quality of Polyethylene Coating on it” March 1996
Mehdiabadi, S., Nehzat, M.S. and Bagheri, R. “Correlating Viscosity for Urea-Formaldehyde Polymerisation” March 1996
Bagheri, R. and Arabi, H. “Mechanical Properties and Thermal Oxidation of EPDM Elastomer” March 1995
Amiri, M.C., Bagheri, R., and Mehranpour, M. “Experimental Studies on Unsaturated Polyester Synthesis May 1994
Bagheri, R. Alimohammadi, A.A. “Polymerisation of Acrylamide Using Permanganate/Lactic Acid Redox System” May 1994
Bagheri, R., “Investigation of Bound Antioxidant in Epichlorohydrin Copolymer and NBR latex” March 1990
Bagheri, R. “Investigation of Polypropylene Photo – Oxidation and Performance of an Effective Photo – Stabiliser” June 1986

تحت نظارت وف ایرانی